2-channel input module
- The D-922E is a 2-channel input module that accepts mic and line level inputs (selectable).
- It is equipped with removable terminal block connectors and DIP switches to adjust input sensitivity, phantom power and ground lifting.
|Input||2 channels, –50/–36/–10/+4dB*1 (Selectable with the DIP switch), 4.7kΩ, electronically-balanced
Phantom power supply (15V, can be set with the DIP switch)
Ground lift switch (can be set with the DIP switch)
|Connector Type||Removable terminal block|
|A / D Converter||20 bits|
|Frequency Response||20 – 20,000Hz, ±1dB (+4dB*1 input)|
|Dynamic range||Over 85 dB (IHF-A weighted) (+4dB*1 input)|
|Total Harmonic Distortion||Under 0.2% (+4dB*1 input)|
|Finish||Panel: Pre-coated steel plate, black, 30% gloss|
|Dimensions||35 (W) x 119.5 (H) x 178.4 (D) mm|
|Note: *1 0dB = 0.775V|
NOM (Number of Open Microphones) - automatically adjusts output level based on the total number of open microphones.Ducker function (Auto-Mute function) - automatically works to attenuate outputs of channels with low priority.
Highly effective feedback suppression.
The D-2000 Series provides feedback elimination for up to 4 channels.
In addition, each channel can control 12 problem frequencies. This
makes it convenient for feedback suppression in different areas of the
same hall. 2 versatile suppression modes.Either presettable Auto Mode or realtime Dynamic Mode can be selected to suit the situation and eliminate feedback.
Essential audio processing
Delay, High-, Low-Pass and Notch Filters, Parametric Equalizers, Compressor/Auto Leveller, Gate, Crossovers and Crosspoint Gain.
32 preset memories for user convenience.
Up to 32 different routing and parameter configurations can be stored in memory and called up to handle venues such as multi-purpose halls
and conference rooms that require frequent changes in staging,seating and speaker arrangements.
The dedicated software’s graphic, visually attractive user interface
helps streamline settings and adjustments.
Mixing console option
The D-2008SP can be connected via network to the D-2012C mixing console with 12 motorized faders and 8 rotary encoders. This enables simplified mixing operation that suit non-professional users. Using the D-2012C, allows input and output channel signal levels to be monitored,volume changes made as well as recalling preset memory settings, and contact control.
D-2000 Series units used in conjunction with the optional D-911 VCA
Fader Unit provides more of an analog mixer user interface.
The RS-232C port allows external control when connected to external
devices such as AMX*1 and Crestron*2 control units. This also allows full control over venue lighting and power curtains (blackout) from a central remote location. This feature is particularly suited for AV presentation rooms, conference rooms and hotel banquet rooms.
The SX-2100AI is an audio input of the matrix system and can be mounted in an EIA equipment rack (2U size). Multiple units can be decentralized in a whole system. It features modular construction that allows it to handle from two to eight inputs per unit. Audio signals are transmitted digitally to the audio output unit, but an analog audio output function (1 channel) enables simultaneous all-zone calls for use in emergency situations. Audio input levels are indicated on the level meters provided for each input channel. Volumes can be adjusted for each channel using the volume controls on the front panel or the SX-2000 software. The volume controls can be locked. Any input channel can be monitored using the internal speaker. It is also equipped with 16 control inputs, and 16 control outputs. It is equipped with two power inputs, allowing for a redundant power system.