Advert
Viewing Product
The VX-2000SF Surveillance Frame is the output matrix section of the VX-2000 system that assigns audio signals to individual zones from 4 audio buses. It can be extended to up to 5 units.
A total of 10 units of output modules and control modules can be installed per VX-2000SF.
Followung modules can be used:
VX-200SP Pilot Tone Detection module
VX-200SP-2 Pilot Tone Detection module with end-of-line module
VX-200SZ-2 Impedance Detection module with A/B loudspeaker lines
VX-200SI Control Input module
VX-200SO Control Output module
| Specification | |
|---|---|
| Power Source | 24V DC (operating range: 20 - 40V DC) M3.5 screw terminal, distance between barriers: 8.8m |
| Current consumption | Under 2A (40V DC) |
| Number of Module slots | 10, usable modules: VX-200SZ, VX-200SP, VX-200SI, VX-200SO |
| Frequency response | 20 - 20,000Hz |
| Signal to Noise Ratio | Over 60dB |
| Distortion | Under 0.5% |
| Cross Talk | Under -60dB (1kHz, 0dB*) |
| Audio Link | Input/Output Number of audio busses: 4 0dB*, electronically balanced, RJ45 female connector Twisted-pair straight cable (TIA/EIA-586A standard) |
| Standby Amplifier Link | RJ45 female connector for connecting the VP-2122, VP-2242, VP-2421 Power Amplifier. Twisted-pair straight cable (TIA/EIA-586A standard) |
| Communication system | VX-2000, VX-2000SF: RJ45 female connector x 2, LONWORKS RS-485 VX-2000DS: RJ45 female connector x 2, Twisted-pair straight cable (TIA/EIA-568A standard) |
| Operating temperature | 0ºC to +40ºC |
| Finish | Panel: Surface-treated steel plate, black, 30% gloss, paint |
| Dimensions | 482 (W) x 132.6 (H) x 337 (D)mm |
| Weight | 5.6kg |
| Accessory | Rack mounting bracket (preinstalled on the unit) x 2, Rack mounting screw x 4, Fiber washer x 4, Blank panel x 9, Blank panel mounting screw x 18, Standby amp. Cable (3m) x 1 |
| Option | IT-450 (audio link output) |
| * 0 dB = 1 V | |
| Note: LONWORKS is a trademark of Echelon Corporation. |
Download now VX-2000_Cookbook_E.pdf
Download now VX-2000 Firmware.zip
VX-200SI
- TOA's VX-200SI Control Input Module is used to increase the number of control inputs to be used in the VX-2000 system. It features 16 control inputs and is mounted in the VX-2000SF Surveillance Frame.
VX-200SO
- TOA's VX-200SO Control Output Module is used to increase the number of control outputs to be used in the VX-2000 system. It features 16 control outputs and is mounted in the VX-2000SF Surveillance Frame.
VX-200SP
- The VX-200SP is an audio signal output module of the VX-2000 system with speaker line pilot tone detection. This module is to be mounted in the VX-2000SF Surveillance Frame and detects speaker line short circuits, open circuits by monitoring for the presence of a pilot signal, and ground fault.
VX-200SZ
- The VX-200SZ is an audio signal output module of the VX-2000 system with speaker line impedance detection. This module is to be mounted in the VX-2000SF Surveillance Frame and detects speaker line short circuits, open circuits by comparing inpedance readings, and ground fault.
Related Categories
