• Ideal for such speech applications as meetings, lectures, and religious services.
• Electret condenser microphone element with cardioid pattern for focused pickup.
• Excellent high-frequency response of 60 – 20k Hz delivers clear output even through a PA system.
• High sensitivity (–35dB) provides a satisfying tonal response.
• Gooseneck with two adjustment points allows more flexible microphone positioning angles.
• Rejection of undesirable off-axis sound minimizes possible feedback.
• Phantom power range of 9 to 52 volts enhances operational versatility

Picture shows EM-800 with optional stand ST-800

• Unidirectional dynamic microphone with built-in electronic chime unit.
• Generates 2 series of 4 notes - from low to high - before an announcemt and vice versa afterwards.
• 2 push buttons for easy operation.

• Desktop type dynamic microphone with cardioid polar pattern.
• Short-off press to talk switch with locking lever.
• Low handling noise.
• 600 Ω unbalanced output impedance.
• 2.5m single-core shielded cable with phone plug.

• Desktop type dynamic microphone with cardioid polar pattern.
• Short-off press to talk switch with open OFF type extra switch contact.
• Low handling noise.
• 600 Ω balanced output impedance.
• 2.5m 4-conductor (included twin-core shielded) cable with 5 pin DIN plug.
• Can be remotely operated with additional components such as priority and transmitting / receiving relays.

• Desktop type dynamic microphone with cardioid polar pattern.
• Short-off press to talk switch with open OFF type extra switch contact.
• Low handling noise.
• 600 Ω balanced output impedance.
• 2.5m 4-conductor (included twin-core shielded) cable without plug.
• Can be remotely operated with additional components such as priority and transmitting / receiving relays

• Amplifier control unit for 5 pin DIN plug remote switch type paging microphone (PM-660D).
• Desktop or wall (standard bracket) mounting.
• Outputs remote control signals for main amplifier power ON / OFF, and for initiating all-call paging.
• Microphone volume control and talk ON indicator.
• Power supplied by locally avalailable AC adaptor.

• Amplifier control unit for 5 pin DIN plug remote switch type paging microphone (PM-660D).
• Desktop or wall (standard bracket) mounting.
• Outputs remote control signals for main amplifier power ON / OFF, and for initiating all-call paging.
• Microphone volume control and talk ON indicator.
• Activates selectable 4-tone, 2-tone and single tone chimes, plus gong, when paging remote microphone's talk switch is pressed.
• Power supplied by locally avalailable AC adaptor.

• Designed for V-1000 Series microphone pre-amps and chime modules.
• Press to talk switch.
• Chime and speech lamps provided.
• Two 5-pin DIN plugs for connection to microphone amps and chime modules.

• Unidirectional Microphone.
• Announcement to each or to all of 5 zones.
• Built in compressor circuit and level indicator prevent input distortion.
• Preselected or "first on" priorities can be established among multiple microphone units.
• AUX input jack and 3 convenient connectors.
• Built in multiple sound chime with selectable automatic or manual operation.

• Unidirectional Microphone.
• Announcement to each or to all of 10 zones.
• Built in compressor circuit and level indicator prevent input distortion.
• Preselected or "first on" priorities can be established among multiple microphone units.
• AUX input jack and 3 convenient connectors.
• Built in multiple sound chime with selectable automatic or manual operation.
• VR-1010 requires V-1069B Data Receiver Module, for a maximum of four remote microphones per V-1069B.
• Connection of VR-1010 to VR-1069B is via one twin shielded signal cable and two twisted data and DC power cables.